Adhesive

The amount of floor adhesive required depends on the size of the area being covered and the specific product's coverage rate. The coverage rate is typically indicated on the adhesive packaging and is measured in square feet or square metres per gallon or litre. 

To calculate the amount of adhesive required, measure the total square footage or square metres of the area to be covered and divide it by the adhesive's coverage rate. It is recommended to purchase slightly more adhesive than the calculated amount to account for any waste or additional needs during installation.

The process of applying floor adhesive may vary depending on the specific adhesive and the type of flooring being installed. However, here are some general guidelines:

• Make sure the subfloor is clean, dry, and free from debris or dust
• Always check and follow the adhesive manufacturer's instructions and guidelines
• Apply the adhesive evenly to the subfloor using a recommended tool
• Follow any specific instructions for open time (how long the adhesive needs to set before installing flooring)
• Lay your flooring planks onto the adhesive, pressing it firmly
• Use appropriate tools like a roller or mallet to get rid of any air pockets
• If you spill or splatter any adhesive, remove it immediately with a recommended solvent
• Allow the adhesive to dry and cure fully before walking on the floor or adding furniture

The thickness of floor adhesive depends on the manufacturer's recommendations and the specific type of flooring material being installed. Building up adhesive thickness is typically achieved by using the appropriate trowel or notched spreader, which determines the amount of adhesive applied. It is crucial to follow the adhesive manufacturer's instructions for proper application and thickness to ensure effective bonding between the subfloor and the flooring material.

The type of adhesive recommended for wood flooring depends on the specific type of flooring, subfloor, and installation method in question. For solid wood or engineered wood flooring, polyurethane or modified silicone adhesives are commonly used. However, it is important to consult the flooring manufacturer's recommendations and follow the adhesive manufacturer's instructions to ensure compatibility and proper adhesion. Contact our sales team to ask about suitable adhesive.

In most cases, adhesive should be applied to the subfloor rather than directly onto the wood flooring planks. This allows for a more secure bond between the subfloor and the flooring itself. 

However, certain adhesive products may have specific instructions that allow for direct application to the backside of the wood flooring planks. It is important to refer to the adhesive manufacturer's recommendations for the correct application method.

The drying time for floor adhesive can vary depending on factors such as the type of adhesive, the ambient temperature of the room, humidity levels, and the thickness of the adhesive layer. It is essential to refer to the adhesive manufacturer's instructions for specific drying and curing times. 

In general, some adhesives may dry within hours, while others may require 24-48 hours or more to fully cure. It is important to avoid walking on the floor until the adhesive is fully cured to ensure proper bonding and durability.

The level of waterproof protection offered by the floor adhesive depends on the specific product. Some adhesives are designed to provide water resistance or waterproofing properties. Make sure to check the adhesive manufacturer's specifications and product information to find out if the adhesive is suitable for areas where moisture or water exposure may occur. 

For wet or high-moisture areas, like bathrooms, basements or kitchens, specialised waterproof adhesives or moisture-resistant options are available and should be used to keep your floor in the best condition.

Removing glued-down wooden flooring can be challenging and may cause damage to the subfloor or the planks themselves. However, it is possible for a flooring professional to remove and replace glued-down flooring with the right techniques and tools. It is essential to hire a professional flooring contractor who has experience in removing glued-down flooring to minimise any risks of damage to the flooring.